{ "id": "boot-bike-rack", "sku": "boot-bike-rack", "title": "Boot Bike Rack", "slug": "boot-bike-rack", "price": 166.99, "currency": "NZD", "availability": "in_stock", "category": "bike-accessories", "category_label": "Bike Accessories", "tags": [], "colors": [], "materials": [], "dimensions": null, "weight": "3.63 kg", "images": [ "https://bikestand.co.nz/dropship-images/bike-accessories/boot-bike-rack/main-boot-bike-rack.jpg", "https://bikestand.co.nz/dropship-images/bike-accessories/boot-bike-rack/boot-bike-rack-2.jpg" ], "description_short": "A steel-framed trunk mount carrier rated to 70 lb (32 kg), with a patented tie-down system that holds bikes steady and keeps frames off your paintwork.", "description": "The problem with getting a bike somewhere\n\nBikes are easy to ride and awkward to move. The moment the good trails or the quiet coastal road are more than a few kilometres from your front door, you need a way to put a bicycle on a car. That is where most people hit a wall.\n\nThe obvious options are expensive or annoying. A tow bar fitted to a modern car costs real money and takes a day at a workshop. Roof bars mean hoisting a bike over your head, then remembering it is up there when you pull into a low car park. Taking the front wheel off and wedging the bike in the back works once, until you see the chainring grease on the parcel shelf.\n\nA boot bike rack is the practical middle option. It straps to the rear of the car you already own, carries two bikes, and comes off in a few minutes when you are done. There is no permanent change to the car and nothing left behind. For a lot of households, it is the only bike transport they will ever need.\n\nHow a boot mounted rack works\n\nThe idea is simple. A steel frame rests against the back of your car on padded contact points. Straps run from the frame to the top edge, the sides and the lower lip of the boot or hatch, pulling the whole thing tight against the bodywork. Two support arms stick out from the frame, and the bikes hang on those arms by their top tubes.\n\nIt is alloy steel, finished in black, with a stated load capacity of 70 lb (32 kg) across up to two bikes. Listed item dimensions are 58.4 x 38.1 x 10.2 cm and the manufacturer lists the item weight at 8 lb (3.6 kg), which makes it a one-person job to carry and fit.\n\nThe detail that separates a good car bike carrier from a frustrating one is how the bikes are held once the car is moving. Bikes that are simply laid across arms will swing, and swinging bikes knock into each other and into the car. This rack uses a patented tie-down system that secures each bike on the arms, which cuts that movement down. In practice that means fewer stops to check the load and fewer scuffs to explain later.\n\nIt also folds. That sounds minor until you own one. A folding rack packs flat for storage, so it lives behind the garage door instead of eating a corner of the boot all year. The arms can also fold in when the rack is mounted but empty, which stops you from reversing a metal bar into a bollard at the supermarket.\n\nWho this suits\n\nThis style of rack is designed for sedans, hatchbacks, minivans and SUVs. That is most of the car park. If you drive a normal family car and you want to take two bikes to a trail head or a holiday house, this is the category you are shopping in.\n\nIt suits a few specific people especially well. New cyclists who do not want to spend as much on transport as they did on the bike. Families with one car that gets used for everything. People in apartments or townhouses where a tow bar rack has nowhere to live between trips. Anyone who rides a handful of times a year rather than every weekend.\n\nIt is less suited to a few cases. Heavy e-bikes are the main one, since two of them will usually blow past a 70 lb (32 kg) total rating. Cars with a spare wheel mounted on the rear door, a large wing spoiler or a tailgate that is mostly glass can be awkward to fit. And if you are hauling bikes several times a week, a tow bar platform rack will be faster to load, if you are willing to pay for it.\n\nHow to choose the right one\n\nStart with your car, not the rack. Walk out and look at the back of it. Is there a flat area of boot or tailgate for the frame to rest on? Can the top straps reach a solid edge, like the top of the boot lid or the top of the hatch opening? Is the lower lip clear enough for a hook? If you can answer yes to those, a trunk mount will work.\n\nNext, count and weigh. Two adult bikes is the design brief here. Weigh yours if you are unsure, especially hybrids with heavy frames and racks. The 70 lb (32 kg) rating is for the whole load, not per bike.\n\nThen look at your bikes' frames. The support arms want a horizontal top tube to sit on. Classic diamond frames are ideal. Step-through frames, many women's bikes, small children's bikes and sloping mountain bike frames do not sit level on their own. The fix is an adapter bar, a simple tube that clamps between the seat post and head tube to create a fake top tube. They are cheap and widely available, and worth buying at the same time if your bikes are that shape.\n\nFinally, think about storage. The best foldable bike rack is the one you actually keep, and a rack that folds flat is far more likely to stay in the house than a bulky one you keep tripping over.\n\nFitting it without drama\n\nGive yourself twenty minutes the first time. Lay the rack on a towel on the ground, open it out, and work out which strap goes where before you touch the car. Then clean the boot surface. Grit between the pads and the paint is the single most common cause of marks, and it takes ten seconds to wipe away.\n\nMount the frame, hook the top straps first, then the sides, then the lower hooks. Tighten in that order and the rack settles into place rather than sliding around. Give the frame a firm shake. It should move with the car, not independently of it.\n\nLoad the heavier bike closest to the car. Secure it with the tie-downs, then load the second bike facing the opposite direction so the handlebars and saddles interleave instead of clashing. Tighten everything, then walk around and check the rear lights and number plate are still visible. Rules vary by region, and some places require a supplementary plate or light board if the rack blocks the original.\n\nDrive for about twenty minutes, then pull over somewhere safe and re-check every strap. Loads settle. That one stop saves a lot of worry over the rest of the trip.\n\nLooking after it\n\nSteel and salt do not get along. If you have driven in rain, on a gritted winter road, or anywhere near the coast, rinse the rack with fresh water and dry it before you fold it away. That single habit does more for the life of the rack than anything else.\n\nCheck the straps before every trip. Webbing stretches and frays, and buckles wear. A strap that looks tired probably is, so replace it rather than hoping. Keep the padded contact points clean, since that protects both the pads and your paint.\n\nStore it folded, indoors, and off bare concrete where damp can wick up.\n\nThe short version\n\nA boot bike rack solves a specific problem well. It carries two bikes on the car you already own, with no tow bar, no roof bars and no permanent fittings.\n\nCheck three things before you order. The shape of your car's rear end, the combined weight of your two bikes, and whether your frames have a level top tube to hang from. Get those right and the rack will quietly do its job for years, then fold up small when the riding season ends.", "llm_summary": "The boot bike rack has an alloy steel frame in black, a stated load capacity of 70 lb (32 kg), and listed item dimensions of 58.4 x 38.1 x 10.2 cm. It is described as suitable for sedans, hatchbacks, minivans and SUVs, is foldable for storage, and uses a patented tie-down system to secure bikes.", "returnable": true, "return_policy": "Change-of-mind returns accepted for 15 days from delivery under this shop's own published policy: original packaging, proof of purchase, buyer pays return postage. The guarantees of the Consumer Guarantees Act 1993 apply to faulty or misdescribed goods, with repair, replacement or refund and return postage covered by the shop.", "shipping_profile": "standard", "warranty": null, "brand": "Bike Stand Company", "gtin": null, "mpn": null, "condition": "new", "url": "https://bikestand.co.nz/product/boot-bike-rack/", "canonical_url": "https://bikestand.co.nz/product/boot-bike-rack/", "json_url": "https://bikestand.co.nz/api/products/boot-bike-rack.json", "updated_at": "2026-11-08", "compare_at_price": 199.99 }